b

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

  • Calendar

    February   2012
    Su Mo Tu We Th Fr Sa
    1 2 3 4
    5 6 7 8 9 10 11
    12 13 14 15 16 17 18
    19 20 21 22 23 24 25
    26 27 28 29
  • tuxuong

    by Published on 7th April 2011 08:10 AM

    Load IOS cho switch bằng cổng Console .


    Step 1 . Chỉnh thông số baud rate trên switch lên tốc độ 115200 bps . Gơ lệnh : set BAUD 115200



    Sau khi gơ lệnh này vào , ta sẽ không console được vào switch nữa , v́ tốc độ console chỉnh trên chương tŕnh Secure CRT không khớp với tốc độ trên cổng console của switch .

    Step 2 . Chỉnh lại tốc độ console trên chương tŕnh SecureCRT .





    Step 3 . Gơ lệnh : copy xmodem: flash:c2960-lanbasek9-mz.122-25.SEE4.bin



    Step 4 : Chọn Tranfer / Send Xmodem



    Step 5 : Chọn IOS cần load và nhấn SEND

    ...
    by Published on 23rd March 2011 10:33 AM



    Ḿnh sẽ setup 2 SSID , một dành cho student và một dành cho staff . Student ở chế độ open , non-security . Staff ở chế độ WPA/WPA2 PSK .

    Đây là đoạn script cấu h́nh Switch



    Switch#sh ip route
    Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
    D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
    N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
    E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
    i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
    * - candidate default, U - per-user static route, o - ODR
    P - periodic downloaded static route

    Gateway of last resort is not set

    10.0.0.0/24 is subnetted, 5 subnets
    C 10.0.10.0 is directly connected, Vlan10
    C 10.0.12.0 is directly connected, ...